Filter
Top Products
MODEL DO-03/04 SECTION 1.0
SPECIFICATIONS
3
SPECIFICATIONS - COMPRESSOR FOR
AIR BLAST CLEANER SYSTEM
Enclosure: Fiberglass reinforced polyester with poly-
ester cover, NEMA 4x (IP65). 11.9 x 11.9 x 6.9 in
(302 x 302 x 175 mm).
Compressor: Oil-less, non-lubricating piston and
cylinder. 1/12 HP permanent split capacitor motor
with thermal overload protection.
Maximum continuous pressure: 50 psig
(446 kPa abs)
Operating pressure: 20 psig (239 kPa abs)
Air hose: 25 ft (7.6 m) included with ABSH
Ambient temperature: 5 to 122°F (-15 to 50°C)
assuming intermittent operation
Power:
Code -03: 115 VAC, 60 Hz or 100
VAC, 50/60 Hz, single phase,1.3 to
1.4 A, starting current 3.88 A, insu-
lation class B; UL approved
Code -04: 220 VAC, 50 Hz, single
phase, 0.6 A, starting current 1.5 A,
insulation class A; CE approved
SPECIFICATIONS - AIR BLAST CLEANER
SYSTEM WASHER HEAD
Process connection: 1-1/2 inch PVC pipe socket
Dimensions (diameter x length): 2-1/2 x 10-3/4
inches (64 x 273 mm)
Wetted materials: PVC, Noryl, Viton
Pipe boom: 1-1/2 inch schedule 80 PVC, maximum
length 12 feet (3.6 m) past handrail mounting clamp.
Pipe boom is supplied by customer.
Maximum distance between compressor and sensor:
25 ft (7.6 m). ABSH is supplied with 25 ft (7.6 m) of air
hose.
SPECIFICATIONS - HANDRAIL MOUNTING
ASSEMBLY
Materials of Construction:
Weather cap: Schedule 40 PVC
Pipe clamp and bracket: Aluminum
Clevis: zinc-plated steel
U-bolts, nuts, and bolts: zinc-plated steel
Washers: stainless steel
SHIPPING INFORMATION
The Model DO-03/04 is shipped in a single container.
Shipping weight is 38 lbs (17.5 kg).
PLANT AIR SYSTEM REQUIREMENTS
(for customers using plant air in place of
air compressor)
Pressure: 20 psig (239 kPa abs)
Flow: 0.50 SCFM (14 L/min at STP)
Air hose: (customer supplied) compatible with ¼ inch
barbed fitting for connection at washer head