Filter
Top Products
68 BASE ENCLOSURE SECURITY SEALS
Section 3: Electrical installation Daniel 3410 Series Ultrasonic Gas Flow Meter Installation Manual
June 2014 3-9000-759 Rev D
3.7.2 Base Enclosure Security Seals
Use the following instructions to install the security seal wire on the Base Enclosure.
Procedure
1. Install security wire seal into and through the hole in the socket head screw on the Base
Enclosure cover (maximum wire diameter .078 inch; 2.0mm).
Figure 3-12 Base Enclosure wire seal installation
2. Position the wire to prevent counterclockwise rotation of the screws when the seal wire
is taut.
A.
A. Base Enclosure cover
B.
B. Security wire seals