Filter
Top Products
98 Security seals for the meter (optional)
Section 4: Configuration Daniel 3410 Series Ultrasonic Gas Flow Meter Installation Manual
June 2014 3-9000-759 Rev D
4.5 Security seals for the meter (optional)
For the integrity of the meter metrology and to prevent tampering with the transmitter
electronics and transducer assemblies, attach security latches on the end caps and install
security wires on the Transmitter Electronics Enclosure end caps, the Bracket/Cover cap head
screws. See Section 3.7 and Section 3.7.4.
Seal the conduit ports with sealing compound according to the customer’s requirements (e.g.,
after approximately one to two weeks of run time). Also, see Section 3.4.1.