Emerson 3414 Oxygen Equipment User Manual


 
60 FREQUENCY/DIGITAL OUTPUTS
Section 3: Electrical installation Daniel 3410 Series Ultrasonic Gas Flow Meter Installation Manual
June 2014 3-9000-759 Rev D
Frequency or Digital Outputs (FODO 3) source
FO1A, DO1A, FO1B, DO1B, FO2A, DO2A, FO2B, DO2B
FO1A, DO1A, FO1B, DO1B, FO2A, DO2A, FO2B, DO2B
Frequency output 1A is based on frequency content (Actual - Uncorrected Flow Rate)
Frequency output 1B is based on frequency content and Frequency 1B Phase
Frequency output 2A is based on frequency content (Actual - Uncorrected Flow Rate)
Frequency output 2B is based on frequency content and Frequency 2B Phase
Digital output 1A is based on Digital output 1A content (Frequency 1 Validity and Flow
Direction)
Digital output 1B is based on Digital output 1B content (Frequency 1Validity and Flow
Direction)
Digital output 2A is based on Digital output 2A content (Frequency 2 Validity and Flow
Direction)
Digital output 2B is based on Digital output 2B content (Frequency 2 Validity and Flow
Direction)
Mode options
Open Collector (requires external excitation supply voltage and pull-up resistor)
TTL (internally powered by the meter 0-5 VDC signal)
Channel B Phase options:
Lag forward, Lead reverse (Phase B lags Phase A while reporting forward flow, leads Phase
A while reporting reverse flow)
Lead forward, Lag reverse (Phase B leads Phase A while reporting forward flow, lags Phase
A while reporting reverse flow)
Phase A and Phase B output (based on flow direction)
Reverse flow - output only reports flow in the reverse direction. For frequency outputs,
Phase B of the output is 90 degrees out of phase with Phase A.
Forward flow - output only reports flow in the forward direction. For frequency outputs,
Phase B of the output is 90 degrees out of phase with Phase A.
Absolute - output reports flow in both directions. For frequency outputs, Phase B of the
output is 90 degrees out of phase with Phase A.
Bidirectional - output reports flow on Phase A only in the forward direction and on Phase
B only in the reverse direction.