Filter
Top Products
Connect Parameter: Options 37
LocalCopy={no, yes} Default is no.
Yes/no option to save to the permanent registry (or saves
the Ericom — PowerTerm® TEC settings locally after
reboot).
Phone=<phone number> Specifies the modem dial-up number. For serial
connection only.
Ping={
yes, no} Default is yes.
Yes/no option to enable ping. For non-published
application connections, a ping (ICMP) is sent to the host
server prior to connecting to verify that the host is
reachable.
Port={
COM1, COM2} Default is COM1.
Designates the connection serial port. For serial
connection only.
Reconnect={
no, yes} Default is no.
Yes/no option to automatically reconnect to an
application server after a disconnection.
ReconnectSeconds=<value in
seconds>
Default is 30.
Specifies the amount of time in seconds (default is 30) to
wait before automatic reconnection to an application
server after a disconnection. Requires Reconnect=yes or
1.
Resolution={
default, 640x480,
800x600, 1024x768, 1280x1024,
1600x1200, <width>x<height>}
Default is default, which starts the connection using the
current desktop display setting with no window frame
or border.
Specifies the connection display resolution. The default
value starts the connection using the current desktop
display setting with no window frame or border. Arbitrary
widthxheight values are accepted.
{TerminalType,
TerminalID,Terminal}=<emulation
type>
Specifies the terminal emulation type.
Termname=<terminal ID string> Specifies the terminal identification string that is sent as a
response when a request for identification is requested to
terminal.
Uiconfig={menu, toolbar, status,
buttons}
Opens the window with the menu, toolbar, status bar, or
buttons.
Table 11 Ericom PowerTerm
®
TEC Connect Options, Continued
Option Description