Filter
Top Products
Parameters for WLX INI and $MAC INI Files Only 19
(continued) Examples:
Security type OPEN example:
WLAN=wlan1 SSID=XYZ Security=none \
Mode=Infrastructure
Security type WEP 40/128-bit key example:
WLAN=wlan2 SSID=XYZ \
Security=wep40/128-bitkey \
Mode=Infrastructure Wep-Key1=1234567890 \
WepKeyIndex=1 AuthType=OpenSystem
Security type WEP 128-bit Passphrase example:
WLAN=wlan3 SSID=ABCD \
Security=wep128-bitpassphrase \
Mode=Infrastructure Wep-key1=1111111111 \
Wep-Key2=2222222222 WepKeyIndex=2 \
Authtype=OpenSystem
Security type WPA & WPA2 Personal example:
WLAN=wlan4 SSID=WPA2 \
Security=wpa&wpa2personal \
Mode=Infrastructure Password=12345678
Security type LEAP example:
WLAN=wlan5 SSID=Wyse Security=leap \
Mode=Infrastructure Username=admin \
Password=1234567890
AuthType LEAP example:
WLAN=wlan6 SSID=ACS \
Security=wpa&wpa2enterprise \
Mode=Infrastructure AuthType=leap \
Username=linux Password=linux
WlanAutoRoaming={no, yes}
[RoamThreshold={-128 to +128}]
Yes/no option to enable the WLAN Auto Roaming
feature and set the Roaming Threshold value for
WLAN.
NOTE: Both WlanAutoRoaming and RoamThreshold
must be in the same line. Supported platforms include
R class and X50L devices.
For example:
WlanAutoRoaming=Yes RoamThreshold=-50
Table 4 Connection Settings: wlx.ini files and $MAC.ini files only, Continued
Parameter Description