Filter
Top Products
18 Chapter 3
VNCPasswd={base-64 encoded
password}
If the VNC-Server Add-on is installed, the password to
be entered for the remote VNC connection. If no
VNCPasswd is specified, the default password is Wyse.
You can use any third party base-64 encoder/
decoder.
WLAN={wlan connection name}
[SSID={SSID Name}]
[Security={NONE,
WEP40/128-BITKEY,
WEP128-BITPASSPHRASE,
LEAP,
WPA&WPA2PERSONAL,
WPA&WPA2ENTERPRISE,
DYNAMICWEP}]
[Mode={Infrastructure, AdHoc}]
[Username={username}]
[Password={password}]
[AuthType={OpenSystem,
SharedKey, TLS, LEAP, TTLS, PEAP}]
[Wep-Key1={wep key1}]
[Wep-Key2={wep key2}]
[Wep-Key3={wep key3}]
[Wep-Key4={wep-key4}]
[WepKeyIndex={Key Index number}]
Wireless LAN can be configured through this INI
parameter and the options.
Securiity Notes:
Supported wireless security types:
Open
WEP 40/128 bit key
WEP 128-bit Passphrase
LEAP
WPA & WPA2 Personal
LEAP in WPA & WPA2 Enterprise
The following security types are not supported:
All WPA & WPA2 Enterprise authentications except a
LEAP which does not require a certificate
Dynamic WEP (802.1x)
Security options descriptions are as follows:
NONE — OPEN Security type
WEP40/128-BITKEY — WEP 40/128-bit Key
WEP128-BITPASSPHRASE — WEP 128-bit Passphrase
LEAP — leap
WPA&WPA2PERSONAL — WPA and WPA2 personal
WPA&WPA2ENTERPRISE — WPA and WPA2 Enterprise
DYNAMICWEP — Dynamic WEP (802.1x)
AuthType Notes:
AuthType should be OpenSystem or SharedKey when
Security is WEP40/128-BITKEY or
WEP128-BITPASSPHRASE; for other enterprise
securities, AuthType should be 'TLS/LEAP/TTLS/PEAP'
For WPA & WPA2 Enterprise security, only the LEAP
authentication type is supported.
WEP-KEY Notes:
WEP-KEY1 through WEP-KEY4 are optional.
WEPKEYINDEX={Key index Number} is optional. If not
specified, by default it is set to the key corresponding
to WEP-KEY1.
Table 4 Connection Settings: wlx.ini files and $MAC.ini files only, Continued
Parameter Description