Filter
Top Products
28 Chapter 4
NFuseServer=host[:port][;host
[:port]]
or
PNAgentServer=host[:port][;host
[:port]]
or
PNLiteServer=host[:port][;host
[:port]]
Specifies a list of PN-Agent servers. If not specified,
port depends on the browsing protocol.
Default=Empty.
PNAgentServer See NFuseServer.
PNLiteServer See NFuseServer.
RdpClipBoard={yes, no} For RDP only.
Yes/no option to enable the clipboard in an RDP
session. Default is yes.
RdpDriveMap=
DO NOT USE.
DO NOT USE. This parameter is being deprecated and
is being removed from Table 7 "Connection Settings:
wlx.ini files, $MAC.ini files, and {username}.ini files."
See replacement RDP.DriveMap= in Table 7
"Connection Settings: wlx.ini files, $MAC.ini files, and
{username}.ini files" and see also Drives= in Table 12
"RDP Connect Options."
Rdp.DriveMap={yes, no} For RDP only.
Yes/no option to enable drive mapping in an RDP
session. Default is yes.
Example:
First, for RDP drive mapping to work, you need to add:
RDP.DriveMap=yes
Second, to map a usb drive for ALL RDP connections,
you would do this outside of any RDP connection
definition. An example that maps the usb drive uses
base directory to map a subdirectory called test on
the usb drive would look like this:
RDP.DriveMap=yes
RDP.Drives=M=disk,/test
You can alternatively specify a drive to map for only
one connection by making it part of the RDP
connection definition. You still need the
RDP.DriveMap=yes outside the connection definition
and then, inside you would use:
Drives=M=disk,/test
See Drives= in Table 12 "RDP Connect Options."
VDAport=integer value Specifies the port of the VDA client. Default is 3471.
See also Enablevda.
Table 7 Connection Settings: wlx.ini files, $MAC.ini files, and {username}.ini files,
Parameter Description