Filter
Top Products
Connectors
2-24 ADSP-21369 EZ-KIT Lite Evaluation System Manual
DPI Header (P3)
The DPI connector (P3) provides access to all of the DPI signals in the
from of a .1” spacing header. When using the header to access the DPI
pins of the processor, ensure that signals, which normally drive the DPI
pins, are disabled. For more information, see “DPI Interface” on page 2-5.
DAI Header (P4)
The DAI connector (P4) provides access to all of the DAI signals in the
from of a .1” spacing header. When using the header to access the DAI
pins of the processor, ensure that signals, which normally drive the DAI
pins, are disabled. Refer to “Codec Setup Switch (SW3)” on page 2-10 for
more information on how to disable signals already being driven from
elsewhere on the EZ-KIT Lite.
USB Connector (P5)
The USB connector (P5) allows to configure and program the processor.
Part Description Manufacturer Part Number
20-pin IDC Header Sullins S2012-10
Part Description Manufacturer Part Number
26-pin IDC Header Berg 54102-T08-13
Part Description Manufacturer Part Number
Type B USB receptacle Mill-Max
Digi-Key
897-30-004-90-000
ED90003-ND