Filter
Top Products
SECTION 11—RECLINER
9000 Jymni™Pediatric Series 58 Part No 1100868
FIGURE 11.3 Replacing the Headrest Pillow
Replacing the Headrest/Back Upholstery
Headrest Upholstery
NOTE: For this procedure, refer to FIGURE 11.4.
1. Remove the headrest pillow. Refer to Replacing the Headrest Pillow on page 57.
2. Remove the six mounting screws that secure the headrest upholstery to the headrest
extension tubes.
3. Secure new headrest upholstery onto headrest extension tubes with the existing six
mounting screws.
4. Install headrest pillow. Refer to Replacing the Headrest Pillow on page 57.
Back Upholstery
NOTE: For this procedure, refer to FIGURE 11.4.
1. Unthread one knob on either side of the spreader bar and loosen the opposite knob.
2. Remove the eight mounting screws that secure the back upholstery to the back canes.
3. Secure new back upholstery to back canes with the existing eight mounting screws.
Securely tighten.
4. Secure knob of spreader bar to side frame. Securely tighten both knobs.
Fastening Strips
Headrest Upholstery
Strap
Strap
Headrest Pillow