Filter
Top Products
SECTION 4—FRONT RIGGINGS
Part No 1100868 31 9000 Jymni™Pediatric Series
SECTION 4—FRONT RIGGINGS
ƽ WARNING
After ANY adjustments, repair or service and BEFORE use, make sure all attaching
hardware is tightened securely - otherwise injury or damage may result.
NOTE: For this procedure, refer to FIGURE 4.1.
NOTE: Refer to General Guidelines on page 12.
Installing/Removing the Swingaway Footrest Assembly
Installing
1. Turn the swingaway footrest assembly to the side (so that the footplate is
perpendicular to wheelchair).
2. Install the hinge plates on the swingaway footrest assembly onto the hinge pins on the
wheelchair frame.
3. Push the swingaway footrest assembly towards the inside of the wheelchair until it
locks into place.
4. Repeat this procedure for the other footrest assembly.
NOTE: The footplates will be facing each other when locked in place.
Removing
1. Push the footrest release lever toward rear of chair.
2. Rotate swingaway footrest assembly outward.
3. Lift the swingaway footrest assembly off of the hinge pins.
FIGURE 4.1 Installing/Removing the Swingaway Footrest Assembly
Footrest Release
Lever
Hinge Plate
Hinge Plate
Hinge Pins