Invacare 9000 STANDARD WEIGHT Wheelchair User Manual


 
SECTION 10—WHEEL LOCKS
Part No 1100868 53 9000 Jymni™Pediatric Series
SECTION 10—WHEEL LOCKS
ƽ WARNING
After any adjustments, repair or service and before use, make sure all attaching
hardware is tightened securely. Otherwise injury or damage may occur
Using Patient Operated Wheel Locks
ƽ WARNING
DO NOT attempt to stop a moving wheelchair with wheel locks. Wheel locks are
not brakes.
NOTE: For this procedure, refer to FIGURE 10.1.
NOTE: Position wheelchair on a flat, level surface to perform this procedure.
1. Ensure the wheelchair is not moving before engaging the wheel locks.
2. Depending on the model of wheel lock installed on the wheelchair, perform one of the
following:
Push-to-Lock - To engage, push the wheel lock handle forward.
Pull-to-Lock - To engage, pull the wheel lock handle backward.
3. Disengage the wheel locks by reversing STEP 2.
FIGURE 10.1 Using Patient Operated Wheel Locks
Wheel Lock
Push-To-Lock
Pull-To-Lock
Unlocked Position
Unlocked
Position
Locked
Position
Locked Position
Wheel Lock