Filter
Top Products
SECTION 7—REAR WHEELS
Part No 1100868 45 9000 Jymni™Pediatric Series
SECTION 7—REAR WHEELS
ƽ WARNING
After any adjustments, repair or service and before use, make sure all attaching
hardware is tightened securely. Otherwise injury or damage may occur.
Removing/Installing the Rear Wheels
ƽ WARNING
If changing the size of the rear wheel or a change in the seat-to-floor height is
desired, this procedure must be performed by a qualified technician.
Permanent Axles
NOTE: For this procedure, refer to FIGURE 7.1.
NOTE: If replacing the same size rear wheel, note the mounting position on the wheelchair frame
for proper reinstallation of the new rear wheel.
1. Remove the dust cap (if applicable), mounting screw and locknut that secure the rear
wheel and axle spacer to the wheelchair.
2. Repeat STEP 1 for the opposite rear wheel.
3. To reinstall the rear wheel onto the wheelchair, reverse STEPS 1-2.
FIGURE 7.1 Removing/Installing the Rear Wheels - Permanent Axles
Wheelchair Frame
Axle Mounting Positions
Rear Wheel
Dust Cap
Lock Nut
Axle Spacer
Mounting Screw