Filter
Top Products
SECTION 6—SEAT AND BACK
9000 Jymni™Pediatric Series 44 Part No 1100868
2. Reposition the back canes to one of two height adjustment mounting holes:
BACK HEIGHT
*NOTE: Mounting holes numbered from bottom to top for reference only.(There are no numbers
on the back canes or wheelchair frame.)
3. Reinstall the two allen screws and locknuts that secure the back canes to the
wheelchair frame and securely tighten.
FIGURE 6.3 Adjusting the Back Height
Adjusting Angle Back - Standard/Light Weight
Adjustable Angle Back Model Only
ƽ WARNING
The back angle directly relates to the stability of the wheelchair. Any change may
cause the wheelchair to decrease in stability. The following procedure MUST be
performed by a qualified technician.
Adjusting the Seat Width and Depth
ƽ WARNING
The back seat depth directly relates to the stability of the wheelchair. Any change
may cause the wheelchair to decrease instability. The following procedure MUST be
performed by a qualified technician.
BACK HEIGHT MOUNTING HOLES*
14 INCH 1 and 2
15 INCH 2 and 3
Back Cane
Height Adjustment
Mounting Holes
Wheelchair
Frame
3
2
1
NOTE: The two (2)
mounting screws and
locknuts that secure the back
cane to the wheelchair frame
are not shown for clarity.