Invacare 9000 STANDARD WEIGHT Wheelchair User Manual


 
SECTION 4—FRONT RIGGINGS
Part No 1100868 33 9000 Jymni™Pediatric Series
Heel Loop Replacement
NOTE: For this procedure, refer to FIGURE 4.3.
Swingaway Footrests/Elevating Legrest (J932A, J932A-14, J933A and
J934A)
1. Remove the four mounting screws and washers that secure the heel loop to the
BOTTOM of the footrest.
2. Remove the heel loop from the footrest.
3. Position the new heel loop as shown in FIGURE 4.3 and reverse STEPS 1-2 to
reassemble.
Elevating Legrest (J934A-14 ONLY)
1. Loosen, but do not remove the bolt and locknut that secure the lower half of the
footrest to the swingaway footrest assembly.
2. Remove the lower footrest assembly.
3. Remove the mounting screw and locknut that secure the heel loop to the footrest.
4. Slide heel loop over cane of the footrest assembly.
5. Replace heel loop.
6. Reverse STEPS 1-4 to reassemble.
NOTE: When securing the heel loop to the footrest assembly, tighten the mounting screw and
locknut until the spacer is secure.
FIGURE 4.3 Heel Loop Replacement
Footrest
Heel Loop
Mounting Screw
Mounting
Screw
Spacer
bolt and Locknut
Cane
Lower
Footrest
Assembly
Locknut
JA932A,
JA932A-14,
J933A, J934A
J934A-14
Heel Loop