Filter
Top Products
SECTION 5—ARMS
9000 Jymni™Pediatric Series 38 Part No 1100868
Using Swing-Back Arms
ƽ WARNING
Make sure the armrest release lever is in the locked position before using the wheel-
chair.
NOTE: For this procedure, refer to FIGURE 5.2.
1. Unlock the swing-back arms by rotating the armrest release lever toward the outside
of the wheelchair.
2. Pull the front of the swing-back arm straight up/out of the arm socket and towards the
rear of the wheelchair.
3. To use the swing-back arm, push the swing-back arm towards the front of the
wheelchair and then downward into the arm socket.
NOTE: Armrest release lever MUST be in the unlocked position when placing armrest into the
arm sockets.
4. Lock the swing-back arms by rotating the armrest release lever towards the inside of
the wheelchair.
FIGURE 5.2 Using Swing-Back Arms
Removing or Replacing Armrest
ƽ WARNING
Make sure the armrest release lever is in the locked position before using the
wheelchair.
NOTE: For this procedure, refer to FIGURE 5.3.
Swing Back
Arm
Rear
Front
Armrest Release Lever
Arm Socket