Filter
Top Products
SECTION 11—RECLINER
Part No 1100868 57 9000 Jymni™Pediatric Series
Installing/Removing Headrest Extension
NOTE: For this procedure, refer to FIGURE 11.2.
Installing
1. Insert headrest extension tubes into back canes.
2. Position the two headrest extension tubes so that the mounting holes in the back canes
align with the mounting holes in both headrest extensions and secure with two detent
pins.
3. Ensure the two detent pins pass completely through the mounting holes in the two
back canes and the headrest extension tubes.
Removing
1. Remove the detent pins that secure the headrest extension tubes.
2. Remove the headrest extension tubes.
FIGURE 11.2 Installing/Removing Headrest Extension
Replacing the Headrest Pillow
NOTE: For this procedure, refer to FIGURE 11.3.
1. Unfasten straps of headrest pillow from behind headrest upholstery.
2. Secure straps of NEW headrest pillow onto fastening strips located on back of
headrest upholstery.
Headrest Extension Tubes
Mounting Holes
Detent Pin
Detent Pin
Back Canes