Filter
Top Products
Chapter 3. Programming Site Data
52 Transport® Model PT878 Portable Liquid Flowmeter User’s Manual
3.8.1 Entering General-Purpose Analog Inputs (cont.)
3. The next prompt asks you to create a label for the units, if desired. (This
label will appear to the right of the zero and span value boxes.) Press
[ENTER] to reopen the text creation window, and follow the same steps
covered in Step 2 on page 51.
4. The next prompt asks for the zero input value.
a. Press [ENTER] to enter the text box.
b. Use the numeric keys to enter the desired value.
c. Press [ENTER] to confirm the entry.
5. The final prompt asks for the span input value.
a. Press [ENTER] to enter the text box.
b. Use the numeric keys to enter the desired value.
c. Press [ENTER] to confirm the entry.
You have completed entering data for general-purpose inputs.
3.8.2 Entering Analog Inputs in the Energy Option
If you have enabled the Energy Option, the screen displays fewer options,
as shown in Figure 28 below.
Figure 28: Analog Inputs Option Window - Energy Option Activated
Analog Input
Cancel OK
Function
Units
Span
Label
Zero
100
Supply Temp
°C
Supply Temp
°C
0
°C
Input A Input B