GE PT878 Oxygen Equipment User Manual


 
Chapter 6. Programming Meter Settings
112 Transport® Model PT878 Portable Liquid Flowmeter User’s Manual
6.1 Entering the Meter Menu
To enter the Meter Menu, press the [MENU] key at the lower right of the
PT878 keypad. The Main Menu replaces the Status Bar at the top of the
screen. Press the [
X] arrow key twice to scroll from the Site Menu to the
Meter Menu. At the Meter Menu, press
[ENTER]. The screen appears
similar to Figure 76 below. While programming, refer to Figure 140 on
page 223 of Appendix A, Menu Maps.
Figure 76: Meter Menu
To scroll to a particular option, press the [
T] or [S] arrow keys until you
reach the option. Then press
[ENTER] to open the option window.
When entering parameters in an option, press:
The [T] key to step through the available parameters
The [S] key to scroll back to a previously entered parameter
The [F2] key (Cancel) or the [ESC] key to exit an option at any time and
return to Operate Mode without changing the parameters.
Velocity, ft/s
Signal, dB
0.00
32
Delta-T, ns
0.10
0.0
Volume, l/s
E0: No Errors
Site Program Meter Logging Service
Units
Date/Time
Locale
Contrast
Backlight
Units
Language
Communication
Totals X
Battery
User Tables
Snapshot