Filter
Top Products
Chapter 3. Programming Site Data
22 Transport® Model PT878 Portable Liquid Flowmeter User’s Manual
3.1 Entering the Program Menu
To enter the Program Menu, press the [MENU] key at the lower right of the
PT878 keypad. The Menu Bar replaces the Status Bar at the top of the
screen. Press the [
X] arrow key once to scroll from the Site Menu to the
Program Menu. At the Program Menu, press
[ENTER]. The screen appears
similar to Figure 9 below. While following the programming instructions,
see Figure 139 on page 222 of Appendix A, Menu Maps.
Figure 9: Program Menu
To scroll to a particular option, press the [
T]or [S] arrow keys until you
reach the option. Then press [ENTER] to open the option window.
When entering parameters in an option, press:
• The [T] key to step through the available parameters
• The [S] key to scroll back to a previously entered parameter
• The [F2] key (Cancel) or the [ESC] key to exit an option at any time and
return to Operate Mode without changing the parameters.
Note: If you enter an incorrect numeric value, press the [W] key to erase
the last digit entered.
Vel
ocity, ft/s
Signal, dB
0.00
32
Delta
-T, ns
0.10
0.0
Volume, l/s
E0: No Errors
Pipe
Lining
Path
Fluid
Energy
Analog Input
Analog Output
Digital Output
User Functions
Site Program Meter Logging Service
Transducer
Co
Correction Factors