Filter
Top Products
Chapter 3. Programming Site Data
30 Transport® Model PT878 Portable Liquid Flowmeter User’s Manual
3.2.2 Confirming Entries
• To confirm the entries and return to Operate mode, press [F3] (OK).
• To leave the window without confirming the entries, press [F2] (Cancel)
or the
[ESC] key.
In either case, the PT878 returns to Operate Mode.
3.3 Entering Pipe Parameters
To enter the Pipe option, scroll to the Pipe entry on the Program Menu and
press
[ENTER]. (From the Transducer window, you can scroll back up to the
Transducer tab and press the [
X] arrow key to reach the Pipe window, and
press
[ENTER].) The screen appears similar to Figure 15 below. To step
through each parameter, press the [
T] key. Refer to Figure 139 on page 222
of Appendix A, Menu Maps.
Note: Refer to the brochure Soundspeeds and Pipe Size Data (914-004) for
additional information about pipe sizes and soundspeeds.
Figure 15: Pipe Option Window
Transducer
Lining
Path
Transducer/Pipe
Pipe Fluid
Cancel
OK
Material
Other
Sound Speed
600.3
m/s
5
ANSI
OD, mm
Wall, mm
2
Nominal
Schedule
OD x PI, mm
15.708
Measure Wall with TGauge