GE PT878 Oxygen Equipment User Manual


 
Chapter 3. Programming Site Data
38 Transport® Model PT878 Portable Liquid Flowmeter User’s Manual
3.5 Entering Fluid Types and Speeds (cont.)
2. Next, you must select the fluid type.
a. Press [ENTER] to open the drop-down menu. Table 6 below lists the
available choices, which vary with your selection of Tracking
Windows or the Energy option.
b. Scroll to the appropriate fluid. If you do not see your fluid on the
list, select “Other.”
Note: Depending on your selection, additional prompts may appear, as
specified in Table 6 above.
c. Press [ENTER] to confirm your selection.
At the end of any sequence, pressing the [T] key returns you to the
Tracking Windows prompt.
Table 6: Fluid Type Selection
Tracking Windows Off Tracking Windows On
Energy Off
Other Water (0-260°C)
Water (0-260°C) Oil
Sea Water Other
Oil (22°C)
Crude Oil
Lube Oil (X200)
Methanol
Ethanol
LN2 (-199°C)
Freon (R-12)
Energy On
Water/0-260°C Water/0-260°C
Water/Glycol (with glycol
percentage)
Water/Glycol (with glycol
percentage)
Other (with single
soundspeed)
Other (with minimum and
maximum soundspeeds)