Filter
Top Products
Instruction Manual
IB-106-5081, Rev. 1.0
May 2005
Rosemount Analytical Inc. A Division of Emerson Process Management Startup and Operation 3-3
Model 5081FG
3-4 OPERATION
a. Overview
This section explains the operator controls
and displays of the Two-Wire In Situ Oxy-
gen Analyzer. The use of the Infrared Re-
mote Control (IRC) and the Model 5081
Transmitter Liquid Crystal Display (LCD) are
described in detail. HART/AMS operation is
not covered here but is discussed in
Section 4, HART/AMS.
b. Display
The Model 5081 Transmitter LCD displays
the O
2
concentration, cell temperature, and
4-20 mA output current during normal op-
eration (see Figure 3-4). The LCD will also
display fault conditions when they occur. To
interact with the transmitter, use the IRC
and navigate through a series of menus
displayed on the LCD.
c. Menu Tree
The screens that can be displayed are
shown in the menu tree of Figure 3-5.
These screens are displayed on the LCD
and are accessed using the IRC keypad.
%
mA
TERMINAL
END
37240004
CIRCUIT
END
MODEL 5081 TRANSMITTER
ELECTRONICS HOUSING
Figure 3-4. Normal Operation Display
3