3-68
Cisco Transport Manager Release 6.0 User Guide
78-16845-01
Chapter 3 Building the Network
3.13 How Do I Test Connectivity for MGX Voice Gateway Devices?
Testing NE connectivity occurs at the management protocol level (SNMP or CORBA).
Step 1 In the Domain Explorer tree, select the MGX node and choose Fault > MGX Voice Gateway >
Diagnostic Center.
Step 2 Click the Manageability tab to display the node login information.
Step 3 Enter the Service Level username and password.
Step 4 Click Check Manageability. The following Manageability Check Results are displayed:
• Node ID
• Node Name
• IP Reachability
• FTP Configuration
• Community String Configuration
• Trap IP Configuration