Cisco Systems 78-16845-01 Wheelchair User Manual


 
3-30
Cisco Transport Manager Release 6.0 User Guide
78-16845-01
Chapter 3 Building the Network
3.6.2 Overview of Supported Links
Links between TXP_MR_2.5G, TXPP_MR_2.5G, MXP_2.5G_10G, TXP_MR_10G, 2.5G_DM,
2.5G_DMP, TXP_MR_10E, MXP_MR_10E cards or DWDM cards are manually created and cannot be
automatically discovered. They can be created if:
The layer rate is Physical.
The link is unidirectional.
The link rate is 10G ITU if a MXP_2.5G_10G, TXP_MR_10G, TXP_MR_10E or MXP_MR_10E
card is used at one end of the link, or 2.5 G ITU if a TXP_MR_2.5G, TXPP_MR_2.5G, 2.5G_DM
or 2.5G_DMP card is used at one end of the link.
The link is unprotected.
The link is created between TXP_MR_2.5G, TXPP_MR_2.5G, MXP_2.5G_10G, TXP_MR_10G,
2.5G_DM, 2.5G_DMP, TXP_MR_10E, or MXP_MR_10E trunk ports and DWDM channel ports.
DWDM channel ports are unidirectional and can only be used as link source if they are transmit
ports and as link destination if they are receive ports.
The working wavelength of TXP_MR_2.5G, TXPP_MR_2.5G, MXP_2.5G_10G, TXP_MR_10G,
2.5G_DM, 2.5G_DMP, TXP_MR_10E, and MXP_MR_10E cards is equal to the expected
wavelength set on the DWDM channel port on the other end of the link.
Table 3-8 Links Supported Between NEs at Compatible Layer Rates
NE Model Supports Links with These NEs at Compatible Layer Rates
ONS 15216 ONS 15216
ONS 15310
ONS 15327 (Physical, SONET/SDH, OCH)
ONS 15454 (Physical, SONET/SDH, OCH)
ONS 15600 (Physical, SONET/SDH, OCH)
ONS 15310 ONS 15216
ONS 15310
ONS 15327
ONS 15454
ONS 15600
ONS 15327
ONS 15454 SONET
ONS 15454 SDH
ONS 15216
ONS 15302
ONS 15305
ONS 15310
ONS 15327
ONS 15454
ONS 15600
ONS 15800
ONS 15801
ONS 15808
CRS-1
XR 12000