Filter
Top Products
3-34
Cisco Transport Manager Release 6.0 User Guide
78-16845-01
Chapter 3 Building the Network
3.6.3 Viewing the Link Table
3.6.3 Viewing the Link Table
The Link table shows information about each link attribute. Use the Link table to view, modify, and
delete links. You can open the Link table for the CTM domain, network partition, subnetwork, group, or
NE.
• If you select the CTM domain, network partition, subnetwork, or group, the Link table shows all
links that terminate on any of the NEs contained in the CTM domain, subnetwork, or group.
• If you select an NE, the Link table shows all links that terminate on that particular NE.
Open the Link Table using one of the following methods:
• From the Network Map—In the Domain Explorer or Subnetwork Explorer, choose File >
Network Map. In the Network Map, select a network partition, subnetwork, group, or NE; then,
choose Configuration > Link Table.
• From the Network Map—Right-click a link and choose Link Table from the shortcut menu.
• From the Domain Explorer—Select the CTM domain, group, or NE; then choose Configuration >
Link Table.
• From the Subnetwork Explorer—Select the CTM domain, network partition, subnetwork, or NE;
then, choose Configuration > Link Table.
Note A link is visible in the Link table even if the source or destination NE has been deleted. If the NE is
deleted from the Deleted Network Elements group, the references to that NE are removed from the Link
table.
ONS 15808 TT/RT
XX
Mux/Demux
XX
Amp
XX
BCS-LH
XX
BCS-ELH
XX
CRS-1 16-OC48
X
4-OC192
X
1-OC768
X
8x10GE
X
XR 12000 16-OC48
X
4-OC192
X
1-OC768
X
8x10GE
X
MDS 9000 Supports links with
CTC-based NEs and
unmanaged NEs
X
Table 3-9 Supported NE Links (continued)
NE Model NE Card Physical OTS OMS OCH SONET/SDH Layer 2