Appendix A: AMX Lighting Curves
74
RE-DM4 and RE-DM6 RADIA Eclipse Dimmer Modules
FIG. 98 is an incandescent dimmer, always on. No command will turn this dimmer off. Relay turn on level =
always on. The RDM-HDC module will output a constant 12 VDC.
FIG. 99 is the voltage plot of the original Radia MC Series in FDB mode. This is provided for informational
purposes only as the current RDD-DM4 does not support FDB mode due to large variety of FDB ballasts.
AMX recommends using the RDM-FDB, RDM-FDB2, RDC-HFDB, or RDC-MDM module for 3-wire
dimming control of FDB ballasts.
FIG. 97 Curve F at 240 VAC
FIG. 98 Curve F Voltage output in Volts RMS
FIG. 99 Curve M & S Voltage output in Volts RMS