Filter
Top Products
Radia Lighting System Configuration Pages
27
RE-DM4 and RE-DM6 RADIA Eclipse Dimmer Modules
Device Configuration Page
This page provides the ability to name your specific Radia device by typing an installation-specific label in the
Lighting Area Name field (FIG. 31).
To configure a particular device from the Device Configuration page:
1. In the main Radia Configuration Manager page, click the Configure button.
2. In the Lighting Area Name field, enter a descriptive name for the area.
3. For each dimmer, change the name in the Label field if necessary.
4. For each dimmer, change the Curve selected in the drop-down menu if necessary.
5. For each dimmer, change the level with the Level slidebar if necessary. The field to the right of the
slidebar will display the exact level. Alternately, enter the exact level you wish to have associated with
that dimmer by entering the number into the field to the right of the slidebar, and the slidebar will move to
match the entry.
6. Click the Accept button at the bottom of the page to save your changes.
Each Radia device has, by default, 11 predefined presets, also shown on the Device Configuration page
(FIG. 32), that can be modified as well.
FIG. 31 Device Configuration Page
Although the Lighting Area Name field can accept over 200 characters, choosing a
short but descriptive name for the lighting area is highly recommended.
You do not need to click the Accept button to save changes if you only adjusted the
dimmer levels by using the Level slidebar. To exit a Radia configuration page, you
must choose Cancel, whether you have chosen to accept the changes or not.