Filter
Top Products
Appendix A: AMX Lighting Curves
58
RE-DM4 and RE-DM6 RADIA Eclipse Dimmer Modules
FIG. 53 shows the output voltage of the RDM-HDC module. Curve 4 is primarily used for control of
Prescolite Intelect Ballast, using the RDM-HDC module. Its range is from 1 to 12 VDC.
Lutron FDB Curve (5)
FIG. 54 shows the output voltage of a dimmer. It quickly dims the high end and extends the mid-range
dimming control with a cut-off at 18 volts. This curve can be useful with two wire dimmable fluorescent
ballasts.
Relay turn on level = 1%
Dimming Range = 16 - 120 VAC.
FIG. 53 Curve 4 Voltage output in volts DC
FIG. 54 Curve 5 Voltage output in Volts RMS
FIG. 55 Curve 5 at 120V