Access Codes
35
To re-enable your PIN:
1. Enter the PUK and press <Confirm>.
2. Enter a new PIN of your choice and press <Confirm>.
3. When the Confirm PIN Code message displays, enter the same code
again and press <Confirm>.
If you enter an incorrect PUK ten times in succession, the SIM card
becomes invalid. Contact your service provider for a new card.
PIN2
The PIN2 (4 to 8 digits), supplied with some SIM cards, is required to
access specific functions supported by those cards.
If you enter an incorrect PIN2 three times in succession, the code is
disabled and you cannot access the functions until you re-enable it by
entering the PUK2.
To change the PIN2, see the Security section in “Set Phone” on page 132.
PUK2
An 8-digit PUK2 (PIN Unblocking Key 2) is required to change a disabled
PIN2.
If a PUK was not supplied with your SIM card, contact your service
provider.
To re-enable your PIN2:
1. Enter the PUK2 and press <Confirm>.
2. Enter a new PIN2 of your choice and press <Confirm>.
3. When the Confirm PIN2 Code message displays, enter the same code
again and press <Confirm>.
If you enter an incorrect PUK2 ten times in succession, the SIM card
becomes invalid. Contact your service provider for a new card.
