Getting Started
8
with the triangle on the connector facing the front of your phone and
plug the connector into the jack.
2. Plug the adapter into a standard AC wall outlet. If the phone is off, the
display indicates that the phone is charging. If the phone is on, the bars
in the battery icon flash to indicate charging.
Note: The battery charging circuit may stop functioning if you are viewing a streaming video and
receive a call while charging as the capacity of the charging circuit will be exceeded.
3. When the phone is fully charged, the message “Battery Full” appears
on the display or the bars in the battery icon stop flashing.
4. Unplug the adapter from the power outlet and disconnect it from the
phone by gently pulling the connector out of the jack.
Note: The phone is also charged when connected to the USB port of a PC using the USB cable.
Low Battery Indication
When the battery is weak and only a few minutes of talk time remain, a
warning tone sounds, the “Low Battery” message appears on the main
display and the empty battery icon flashes. The backlight dims to
conserve the remaining battery power. When the battery level becomes too
