Settings
135
General
This menu (Menu 9.5.1) lets you configure high-level features that specify
how calls are handled. To access the settings for any of these features, use
the navigation keys to select the feature and then press [ ].
Show My Number: Lets you specify how your ID is handled when you
initiate an outgoing call.
• By Network: You are identified to the recipient using the default
network information.
• Send: Your phone number and name are sent to the recipient.
• Hide: Your identification is hidden from the recipient.
Auto Reject: Lets you automatically reject calls from a specified list of
contacts. For details on how to enable this feature, see “Enable and
Configure Auto Reject” on page 136.
Call Answer: Provides a choice of methods for answering a call on your
phone (Send Key, Open Flip, Any Key).
Auto Reply: Lets you enable and configure auto reply. Use the left and
right navigation keys to enable (On) and disable (Off). If you select On,
press the down navigation key to highlight the Reply to send area and
type the message you want sent as an automatic reply.
Call Status Tones: Lets you activate alert tones that sound during a
call. Scroll up or down to select one of the following options and press
the key to enable (check) or disable (uncheck) options. When you
are done, press Save soft key to save the selection.
• Call Connect Tone: Sounds a tone when a call connection is
successful.
• Minute Minder: Sounds a tone after each minute of a call.
• Call End Tone: Sounds a tone when a call connection is terminated.
Alerts on Call: Lets you specify whether you want to be alerted by a
tone when a message is received or the time for an alarm is reached
while you are on a call. Select either On or Off and press <Save> or [ ]
to save the selection.
