3. If you wish to change the setting, press 6
using the ten keypad.
Digit 6 (Double underlined)
0: Local Printing Off
1: Local Printin On
4. Finish: Press Yes, then press Function.
Enabling and Disabling the Forwarding Mark
The forwarding mark is printed at the receiving end on the top of each page of the
fax messages that are forwarded from your machine. This mark will help the
operator at the other end to recognize messages that have been forwarded. If you
wish, you can switch this mark off.
To switch the Forwarding Mark on or off, do the following procedure. (See page
156 if you need more information about the User Parameter settings adjustment
procedure).
1. Function 6 2 2 2 2 6 3 and Yes.
2. Yes.
The settings for switch 00 are now
shown on the bottom line of the display.
3. Press until the settings for switch 02 are
shown.
The setting that you need to change is
digit 0.
Digit 0 (Double underlined)
0: Forwarding Mark is Off.
1: Forwarding Mark is On.
4. If you wish to change the setting, press 0
on the ten keypad.
5. Finish: Yes and Function.
ADVANCED
FEATURES
ADVANCED FEATURES RECEPTION
85
