Erasing a Speed Dial
1. Function 3 2 and Yes.
2. Input the Speed Dial Code that you wish
to erase. Example: If you want to erase
Speed Dial code 01; press 0 and 1 on
the ten keypad.
❐ If the wrong number is displayed, use and
to scroll through the Speed Dial Codes on the
screen
.
3. Yes.
4. No and Yes.
After erasing a number, you can store a
new one to replace it.
If you do not wish to erase another
Speed Dial number, go to step 2 to con-
tinue or press Function if you have fin-
ished.
Programming Groups
Groups allow you to combine some numbers into one group, for easy sequential
transmission to all the numbers in that group. These numbers can be selected
from those already stored in Quick Dial keys or Speed Dial Codes, or you can
select other numbers by entering them at the keypad.
You can also store a label with each Group. This label will be displayed when you
select the Group.
NOTE: See page 20 for how to dial a group.
The Group programming procedure has several stages. Entering Group
Programming mode will be explained first, followed by the other stages.
Entering Group Programming Mode and Selecting a Group
1. Function 3 3 and Yes.
2. Input the number of the group that you
wish to program.
❐
There are 7 groups, from 1 to 7.
APPENDIX A
INITIAL SETTINGS APPENDIX A
184
