Rejection of Messages from Unidentified Senders
If you wish, you can make the machine reject incoming messages that require
storage to your machine’s memory, if they are not accompanied with an identifier
such as the RTI or CSI. Features that would be affected are Substitute Reception,
Memory Lock, and Confidential Reception, Forwarding, and Action as a Transfer
Station.
The procedure is as follows (see page 168 if you need more information about the
User Parameter settings adjustment procedure).
1. Function 6 2 2 2 2 6 3 and Yes.
❐ At this time, you can print a User Parameter
List if you press and Start.
2. Press Yes. The settings for switch 00 are
now shown on the bottom line of the dis-
play.
3. Press until the settings for switch 05 are
shown.
The setting that you need to change is
that for digit 1.
Digit 1 (Double underlined)
0: Messages are not rejected.
1: Messages are rejected.
4. If you wish to change the setting, press 1
on the ten keypad.
5. Finish: Yes and Function.
Cross-references
Substitute Reception: see page 38. Confidential Reception: see page 71.
Memory Lock: see page 74. Forwarding: see page 82.
RECEPTION ADVANCED FEATURES
78
