Setting the Date and Time
Your fax machine has an internal clock. It controls the following features.
❐ The time display on the operation panel while the machine is idle.
❐ Operation of time-delay features like Send Later.
❐ The date and time that is printed out on pages that you receive, if Reception
Time is switched on.
❐ The date and time that is printed out at the other end on pages received from
your machine.
Program the correct date and time when you install the machine.
Cross-references:
Send Later: see page 29.
1. Press Function 6 2 2 2 2 9 1 and Yes.
Example: Change to 09 May ’95, at
10:25AM
2. Change the month using ∗ or # (∗ to
scroll forward, or # to scroll backward)
on the ten keypad and press to move
the cursor.
3. Change the date with the ten keypad to
09.
4. Type in the year and time at the keypad
as 9 5 1 0 2 5.
5. Change AM/PM using ∗ or # on the ten
keypad.
6. When the display is correct, press Yes
Function.
Daylight Saving Time
Whenever local custom requires advancing the clock or setting the clock back,
use this feature. You can easily move the clock forwards when daylight saving
time begins, and back when it ends.
❐ When you install the machine for the first time, take care that the setting is
correct before you set the date and time.
1. Press Function 6 2 2 2 2 6 2 and Yes.
2. Press until the screen is as shown oppo-
site, and then press Yes.
INITIAL SETTINGS APPENDIX
188
