Reception Time
When you receive a message, the time is printed at the bottom of the page.
However, this is the time at the transmitting end or printing end. To check the local
time, you have to print the TCR.
However, if you switch on Reception Time, the local time is also printed at the
bottom of on each page that you receive. The time is taken from your machine’s
internal clock, and is the same as the time that will be printed on the TCR. Switch
this feature on if you often receive fax messages from other countries.
Cross-references
TCR: see page 123. Date and Time: see page 188.
To switch this feature on, do the following. (See page 168 if you need more
information about the User Parameter settings adjustment procedure).
1. Function 6 2 2 2 2 6 3 and Yes.
2. Press Yes. The settings for switch 00 are
now shown on the bottom line of the dis-
play.
3. Press until the settings for switch 02 are
shown.
The setting that you need to change is digit
2 (double underlined).
Digit 2 (Double underlined)
0: The Reception Time will not be
printed.
1: The Reception Time will be
printed.
4. If you wish to change the setting, press 2
on the ten keypad.
5. Finish: Yes and Function.
Reducing the Page Length
If the machine receives a page that is longer than the paper in the cassette, the
machine reduces the length of the received image so that it will fit on one page, if
the image length is within the following limits.
Paper size in the cassette Maximum reducible incoming page length
Letter (11") 14.4"
Legal (14") 16.2"
If the received image is longer than the above limits, there is no reduction and the
image is split up and printed on two sheets of paper. Normally, the last 0.4 inch of
the received image will be repeated at the beginning of the next page.
RECEPTION ADVANCED FEATURES
98
