Reception Time
When you receive a message, the time is printed at the bottom of the page.
However, this is the time at the transmitting end or printing end. To check the
local time, you have to print the Journal.
However, if you switch on Reception Time, the local time is also printed at the
bottom of on each page that you receive. The time is taken from your machine’s
internal clock, and is the same as the time that will be printed on the Journal.
Switch this feature on if you often receive fax messages from other countries.
Cross-references:
Journal: see page 137. Date and Time: see page 204.
To switch this feature on, do the following. (See page 184 if you need more
information about the User Parameter Settings adjustment procedure).
1. Function 6 2 2 2 2 6 3 and Yes.
2. Press Ye s. The settings for switch 00
are now shown on the bottom line of
the display.
3. Press until the settings for switch 02
are shown.
The setting that you need to change is
digit 2 (Double underlined).
Digit 2 (Double underlined)
0: The Reception Time will not be
printed.
1: The Reception Time will be printed.
4. If you wish to change the setting, press 2
on the ten keypad.
5. Finish: Yes and Funciton.
ADVANCED
FEATURES
ADVANCED FEATURES RECEPTION
109
