Basic transmission procedure
Memory Transmission Immediate Tranmission
1 Make sure that the machine is in standby mode.
2
Check that the Memory indicator is lit.
If it is not lit, press MEMORY
Check that the Memory indicator is not
Lit.
If it is lit, press MEMORY
3 Carefully place the document in the feeder.
4 Select the contrast and resolusion (and halftone if neccessary)
5
You may select one or more of the
following options. To select an option,
press the right arrow on the scroll key,
then press one of the following
combinations of keys.
Personal Code
Send Later
TRD *
Page Count
TTI On/ Off
6
Enter the telephone number in one of the following ways
Quick Dial
Speed Dial
Group Dial
Ten Key Pad
Handset
On Hook Dial
Quick Dial
Speed Dial
Ten Key Pad
Handset
On Hook Dial
7 Press YES Press START
8
Either:Dial another number go to step 6.
then Press Start. To dial another number,
go to step 6. Otherwise, press Start.
9
The machine stores your meesage in
memory, then sends it to each terminal in
sequence.
The machine dials, then your message is
fed, scanned, and sent to the other
terminal.
*: Feature Expander Required
