Storing a Keystroke Program
1. Make sure that the machine is in standby
mode (see page 18).
2. Place a sheet of paper in the feeder.
❐ Skip step 2 if you are making a Polling
Reception program.
3. Select all required features (such as Trans-
fer Request) and telephone numbers as
you would normally do.
❐ Contrast, resolution, and halftone cannot be
stored in a keystroke program.
4. Press the Quick Dial key that you wish to
store the program in.
Example: Quick Dial key 01.
❐ Make sure that this key is vacant.
5. To complete the program: Yes.
NOTE: The procedure that you just
stored will now begin. If you do
not wish to use the procedure
now, press Stop immediately.
Labeling a Program
If you store a label for your keystroke programs, the label will appear on the
display when you use the program.
1. Function 3 4 and Yes.
If you press and Start, a Program List
will be printed.
2. Press the Quick Dial key that holds the
program that you wish to label.
Example: Quick Dial key 01 and Yes.
3. To program a label for this program; Yes.
4. Input your label, using the Quick Dial keys.
How to enter the label: see page 166.
TRANSMISSION ADVANCED FEATURES
50
