IN1606 Scaling Presentation Switcher • Internal Web Pages 68
Connection Settings Page
The Connection Settings page contains options to adjust device settings for RS-232 and
Ethernet connections. Click the Connection button to open the page.
Figure 42. Connection Settings Page
RS-232 settings
1. From the Baud Rate drop-down menu, select the appropriate baud rate.
2. From the Stop Bits drop-down menu, select the number of bits used to indicate a
byte.
3. From the Bits drop-down menu, select the number of data bits to transmit.
4. From the Parity drop-down menu, select the parity checking type.
5. Click the Save button.
Ethernet settings
To configure the Ethernet settings for use with DHCP:
1. Select the Use DHCP check box.
2. In the Hostname field, enter a hostname or device name if required.
3. Click the Save button.
To configure the Ethernet settings with a static IP address:
1. In the Hostname field, enter a hostname (device name).
2. Ensure the Use DHCP check box is not selected.
3. In the IP Address field, enter an IP address.
4. In the Subnet Mask field, enter the subnet mask if required.
5. In the Default Gateway field, enter the default gateway to be used.
6. In the DNS Sever field, enter a DNS server name.
7. Click the Save button.
To reset to default settings:
To reset the device to default connection values, click the Reset to Default button.
