IN1606 Scaling Presentation Switcher • Internal Web Pages 60
d. Select the applicable Duck check boxes to select the desired outputs.
e. In the Duck By field, enter a value or press the Up or Down arrow button to specify
an individual attenuation setting.
5. For each Mic/Line input, click and drag the handle of the Gain slider, or enter a value in
the field below the slider or click the Up or Down arrow button to adjust the gain level.
Click the Mute button to mute the Mic/Line input.
6. Select the Enable Meters check box to display Mic/Line input meters.
Mix Controls tab
Figure 33. Mix Controls Tab
To access the mix control options, click the Mix Controls tab.
Mic Mix Levels section
For each Mic, click and drag the handle of the Level slider, or enter a value in the field
below the slider or click the Up or Down arrow button.
Click a Mute button below the Mic 1 or Mic 2 slider to mute the corresponding Mic input.
Group Controls section
1. For the Mic Volume and Program Volume sliders, click and drag the limiters of the
sliders to set minimum and maximum volume limits.
2. Click and drag the handle of the Mic Volume and Program Volume slider, or enter a
value in the field below the sliders or click the Up or Down arrow button.
Click the Mute button to mute the input.
3. For the Bass and Treble sliders, click and drag the limiters of the sliders to set
minimum and maximum limits.
4. Click and drag the handle of the Bass and Treble slider, or enter a value in the field
below the sliders or click the Up or Down arrow button.
