IN1606 Scaling Presentation Switcher • SIS Communication and Control 34
Command ASCII Command
(host to scaler)
Response
(scaler to host)
Additional Description
Picture Adjustment Commands
Video mute (defaults to unmuted after a power cycle)
Mute video to black
1B
Vmt1]
Mutes the video output to black.
Mute sync and video
2B
Vmt2]
Mutes the video output and sync.
Unmute video/sync
0B
Vmt0]
Unmutes the output.
View
B
X2*]
View the mute status.
Color (NTSC, PAL, and SECAM inputs only)
Specify a value
EX1%COLR} ColrX!*X1%]
Set the color level on the current
input.
Increment value
E+COLR} ColrX!*X1%]
Increase the color level.
Decrement value
E-COLR} ColrX!*X1%]
Decrease the color level.
View
ECOLR} X1%]
View the color level setting.
Tint (NTSC inputs only)
Specify a value
EX1%TINT} TintX!*X1%]
Set the tint on the current input.
Increment value
E+TINT} TintX!*X1%]
Increase the tint.
Decrement value
E-TINT} TintX!*X1%]
Decrease the tint.
View
ETINT} X1%]
View the tint setting.
Contrast
Specify a value
EX1%CONT} ContX!*X1%]
Set the contrast for the current
input.
Increment value
E+CONT} ContX!*X1%]
Increase the contrast.
Decrement value
E-CONT} ContX!*X1%]
Decrease the contrast.
View
ECONT} X1%]
View the contrast setting.
Brightness
Specify a value
EX1%BRIT} BritX!*X1%]
Set the brightness on the current
input.
Increment value
E+BRIT} BritX!*X1%]
Increase the brightness.
Decrement value
E-BRIT} BritX!*X1%]
Decrease the brightness.
View
EBRIT} X1%]
View the brightness setting.
Detail filter
Specify a value
EX1%HDET} HdetX!*X1%]
Set the detail filter for the current
input.
Increment value
E+HDET} HdetX!*X1%]
Increase the detail.
Decrement value
E-HDET} HdetX!*X1%]
Decrease the detail.
View
EHDET} X1%]
View the detail filter setting.
NOTES:
X! = Input selection 1-6
X1% = Picture adjustment 0-127 (64 = default)
X2* = Video mute 0 = disabled
1 = enabled (mute to black)
2 = mute all output sync
