IN1606 Scaling Presentation Switcher • SIS Communication and Control 31
Command and Response Tables
Command ASCII Command
(host to scaler)
Response
(scaler to host)
Additional Description
Input Switching and Configuration Commands
Input selection
Video and audio
X!! InX!
•
All]
Select video and audio from
input X!.
Video only
X!& InX!
•
RGB] Select video-only from input X!.
Audio only
X!$ InX!
•
Aud] Select audio-only from input X!.
View video input
&
X!]
View the current video input.
View audio input
$
X!]
View the current audio input.
View current input
!
X!]
View the current video and
audio input.
NOTE: Audio breakaway ($) is not allowed to an input configured for any digital audio format.
Video breakaway (&) is not allowed from an input configured for any digital audio format.
Attempting either of these invalid modes gives an E17 error.
Audio breakaway is always allowed back to the current video input.
Input video format
Set video format
X!*X#\ TypX!*X#] Set input X! to format X#.
View set format
X!\ X#]
View the video format.
Input EDID (VGA and HDMI)
Assign EDID to input
EAX!*X4(EDID} EdidAX!*X4(] Assign EDID to input X!.
View assigned EDID
EAX!EDID} X4(] View the EDID for input X!.
Save an output EDID
to custom slot
ESX@*X4(EDID} EdidSX@*X4(] Save output X@ EDID to X4(
(3-8).
Export EDID file
EEX4(,<filename>EDID} EdidEX4(] Export X4( (3-8) EDID.
Import EDID file
EIX4(,<filename>EDID} EdidIX4(] Import X4( (3-8) EDID.
NOTE: <filename> can optionally carry a full path name. The EDID file will be a .bin file, carrying 128 or 256
bytes of binary data.
Exporting a default EDID table (for an X4^ value of 10 or greater) results in the HDMI LPCM-2Ch table being
exported.
NOTES:
X! = Input selection 1-6
X@ = Output selection 1 = HDMI A (top)
2 = HDMI B (bottom)
X# = Input video format 1 = RGB
2 = YUV
3 = RGBcvS
4 = S-video
5 = composite
6 = HDMI
X4( = EDID emulation See the EDID table on page 30.
