A SERVICE OF

logo

IN1606 Scaling Presentation Switcher • SIS Communication and Control 44
Command ASCII Command
(host to scaler)
Response
(scaler to host)
Additional Description
IP Control Port
NOTES: Changes made to any TCP/IP settings do not take effect until the reboot networking command
(E2BOOT}) is issued.
Set IP address
24
EX4)CI} Ipi
X4)]
Set the IP address.
Read IP address
24
ECI} X4)]
View the current IP address.
Set DHCP mode
EX(DH} IdhX(]
Set the DHCP mode.
View DHCP mode
EDH} X(]
View the DHCP mode setting.
Set subnet mask
24
EX4!CS} Ips
X4!]
Set the subnet mask.
View subnet mask
ECS} X4!]
View the subnet mask setting.
Set gateway IP
address
24
EX4@CG} Ipg
X4@]
Set the gateway IP address.
View gateway IP
address
ECG} X4@]
View the gateway IP address
setting.
Reboot networking
E2BOOT} Boot2]
Restarts the network after IP
setting or DHCP changes.
NOTE: Changes to IP or DHCP settings will not take effect until the E2BOOT} command is executed.
NOTES:
X( = Enable or disable 0 = off or disabled
1 = on or enabled
X4) = IP address xxx.xxx.xxx.xxx (192.168-254.254 = default)
X4! = Subnet mask xxx.xxx.xxx.xxx (255.255.0.0 = default)
X4@ = Gateway address xxx.xxx.xxx.xxx (0.0.0.0 = default)