IN1606 Scaling Presentation Switcher • SIS Communication and Control 40
Command ASCII Command
(host to scaler)
Response
(scaler to host)
Additional Description
Advanced Configuration Commands
Test pattern
Set pattern
EX2)TEST} TestX2)]
Set a test pattern.
View test pattern
ETEST} X2)]
View the current test pattern.
Freeze
Enable
1F
Frz1]
Freeze the current input.
Disable
0F
Frz0]
Unfreeze the current input.
View
F
X(]
View the freeze setting.
Video switch effect
Cut
E0SWEF} Swef0]
Set the switch effect to cut.
Fade through black
E1SWEF} Swef1]
Set the switch effect to fade
through black (default).
View setting
ESWEF} X3!]
View the switch effect setting.
Input aspect ratio (per input)
Set for fill
EX!*1ASPR} AsprX!*1]
Fill the entire output.
Set to follow
EX!*2ASPR} AsprX!*2]
Maintain the input aspect ratio.
View aspect setting
EX!ASPR} X2^]
View the aspect ratio setting.
Executive mode
Enable mode 1
1X
EExe1]
Lock the entire front panel.
Enable mode 2
2X
EExe2]
Limit front panel control to input
switching and volume control only.
Disable
0X
EExe0]
Unlock the front panel.
View status
X
X2$]
View the executive mode.
NOTES:
X! = Input selection 1-6
X( = Enable or disable 0 = off or disable
1 = on or enable
X2) = Test patterns 0 = none (default)
1 = crop
2 = alternating pixels
3 = color bars
4 = grayscale
5 = blue mode
6 = audio test pattern
X2$ = Executive mode status 0 = off or disabled (default)
1 = mode 1 (complete front panel lockout)
2 = mode 2 (input selection and volume control only)
X2^ = Aspect ratio setting 1 = fill (default)
2 = follow
X3! = Video switching effect 0 = cut
1 = fade through black (default)
