6-8 Neuron Exporter Errors (NEX)
NEX# Description
57
Unable to determine beta-2 control value using transceiver
<xcvr> [NEX#57]
Unable to determine the beta-2 control value. See error message
for failure details. Make sure your standard transceiver database
(stdxcvr.xml) has not been corrupted. An update might be
available at the www.lonmark.org website. Contact LonSupport if
problem persists.
58
Unable to determine transmit interpacket padding using
transceiver <xcvr> [NEX#58]
Unable to determine the transmit interpacket padding. See error
message for failure details. Make sure your standard transceiver
database (stdxcvr.xml) has not been corrupted. An update might
be available at the www.lonmark.org website. Contact LonSupport
if problem persists.
59
Unable to determine receive interpacket padding using
transceiver <xcvr> [NEX#59]
Unable to determine the receive interpacket padding See error
message for failure details. Make sure your standard transceiver
database (stdxcvr.xml) has not been corrupted. An update might
be available at the www.lonmark.org website. Contact LonSupport
if problem persists.
60 Unknown command ID <id> [NEX#60]
This is an internal error condition, please contact LonSupport
61
Cannot create file '<file>' (missing external utility <utility>)
[NEX#61]
A file <file> cannot be created because tool <utility> is missing, or
cannot be found on the system search path. Contact LonSupport if
problem persists.
62
Cannot export 'clone domain' and 'no domain' (the two features
are mutually exclusive) [NEX#62]
When exporting an image as configured, this image can be
exported with domain information, without domain information
('no domain'), or into the 'clone domain'. These three scenarios are
mutually exclusive. See the Neuron Chip data book and the
NodeBuilder User's Guide for details about exporting configured
images.
63
The configured image can not be exported authenticated in the
chosen domain configuration [NEX#63]
For an image to be exported authenticated, a domain ID (with a
length of 1, 3, or 6 bytes), and a subnet/node ID (different from 0/0)
must be used unless the firmware supports open media
authentication. See the Neuron Chip data book and the
NodeBuilder User's Guide for details about exporting configured
images.
