xStack
®
DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
79
DGS–3426:5#delete syslog host 4
Command: delete syslog host 4
Success.
DGS–3426:5#
show syslog host
Purpose Used to display the syslog hosts currently configured on the Switch.
Syntax
show syslog host {<index 1–4>}
Description This command is used to display the syslog hosts that are currently configured on the
Switch.
Parameters
<index 1–4> − Specifies that the command will be applied to an index of hosts. There are
four available indexes, numbered 1 through 4.
Restrictions None.
Example usage:
To show syslog host information:
DGS–3426:5#show syslog host
Command: show syslog host
Syslog Global State: Disabled
Host Id Host IP Address Severity Facility UDP port Status
––––––– –––––––––––––– –––––––––– –––––––– –––––––– ––––––––
1 10.1.1.2 All Local0 514 Disabled
2 10.40.2.3 All Local0 514 Disabled
3 10.21.13.1 All Local0 514 Disabled
Total Entries : 3
DGS–3426:5#
show syslog
Purpose Used to display the global current running status of the syslog function.
Syntax
show syslog
Description This command will display the current running status of the syslog function on the Switch.
Parameters None.
Restrictions None.
Example usage:
To show the global state of the syslog function:
DGS–3426:5#show syslog
Command: show syslog
Syslog Global State: Disabled
DGS–3426:5#
