xStack
®
DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
Example usage:
To configure the SSH user:
DGS–3426:5# config ssh user Rubio authmode Password
Command: config ssh user Rubio authmode Password
Success.
DGS–3426:5#
show ssh user authmode
Purpose Used to display the SSH user setting.
Syntax
show ssh user authmode
Description This command is used to display the current SSH user setting.
Parameters None.
Restrictions Only Administrator-level users can issue this command..
Example usage:
To display the SSH user:
DGS–3426:5#show ssh user authmode
Command: show ssh user authmode
Current Accounts:
UserName Authentication Host Name Host IP
–––––––––––– ––––––––––––––––– ––––––––––––– –––––––––
Rubio Hostbased 12334 10.45.25.8
DGS–3426:5#
NOTE: To configure the SSH user, the administrator must create a user account on the
Switch. For information concerning configuring a user account, please see the section of
this manual entitled Basic Switch Commands and then the command, create account
user.
286
