xStack
®
DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
131
DGS–3426:5#delete igmp_snooping multicast_vlan test
Command: delete igmp_snooping multicast_vlan test
Success.
DGS–3426:5#
config igmp_snooping multicast_vlan
Purpose Used to configure an ISM VLAN on the Switch, add source port, member port to this
VLAN, and set state
Syntax
config igmp_snooping multicast_vlan <vlan_name 32> member_port <portlist> |
source_port <portlist> | tag_member_port <portlist> |state [enable|disable] |
replace_source_ip <ipaddr> (1)
Description This command is used to configure the settings for a previously created multicast VLAN
on the Switch.
Parameters <vlan_name 32> – Specifies the ISM VLAN name. The maximum length is 32 characters.
member_port <portlist> – Add untagged member ports to ISM VLAN, which connect with
PC users
tag_member_port <portlist> – Add tagged member ports to ISM VLAN, which connect
with PC users.
source_port <portlist> – Add source ports to ISM VLAN, which connect with uplink server
state [enable | disable ] – Enable or disable the ISM VLAN.
replace_source_ip <ipaddr> – Specifies the IP address used to replace a source IP
address in the received IGMP control packet only if a unicast IP address is valid.
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
To configure a member port, source port, set of ISM VLANs:
